Boost heating in half the time while saving energy.
+22%
Energy savings
2x
Faster heating
31%
Less CO2 emission
Installed in a few minutes
You can place the SpeedComfort at the bottom of the radiator with the magnets. You use the legs for convectors. Connected to power, the fans switch on and off automatically, thanks to the temperature sensor. This way you can enjoy more heat with less energy in no time, without tools!
Designed for radiator and convector
Standard radiator
Most radiators have two or three plates with at least 7 cm of space between them. Place the SpeedComforts in this space at the bottom of the radiator by connecting the magnets to the plate, using the sliders.
Narrow radiator
Less than 7 cm space between the plates? No problem! Pull the magnetic slides out of the housing and place them back with the magnets facing upwards. This way you can hang the SpeedComfort tightly under your radiator.
Single plate radiator
For a radiator with one plate, pull the magnetic slides out of the housing and place them back on one side with the magnet upwards. Click the SpeedComfort against the back of the radiator so that it hangs neatly underneath.
Convector
Each SpeedComfort comes with four handy feet. You click them on the SpeedComfort and then place the SpeedComfort on or under your convector.
Save without losing comfort
SpeedComfort spreads heat in the room more evenly and twice as fast. This allows the thermostat to be lowered 1-2 degrees for the same comfort. The temperature of the boiler can also be lowered to 60 degrees, without sacrificing heat in the room. The fans use less than 32 cents of electricity per year.
Sustainable and social
Made with social impact and a minimal footprint.
The original inventor
Since 2015, the Dutch pioneer in radiator fans.
Quality
Built to last. 10-year warranty.
Easy to install
Installed in minutes, without tools.