For self-assembly of the set, combine Article B: the SpeedComfort including 30 cm connection cable as many times as required, and combine with one Article A: an adapter, a thermostat switch and a Velcro strip.
These plates are support points for the magnets that slide in and out on the wall. They are intended for use with a SpeedComfort Narrow under a type 11 radiator.
Note: A gap of at least 55 mm between the back of the panel and the wall is required.
This foil is easily attached to the back of a radiator. This will prevent heat dissipating through the external wall. And pushes the heat from the SpeedComfort back into your room. A complimentary effort.
The foil is 50 cm wide and 7.5 m long. 15 m of double-sided tape is also supplied.